I have noticed that the wiring on the X-axis & z-axis is backwards from the instructions, but the instructions also state that they can only be wired one way so it doesn’t seem that I can do much about that. I’ve disconnected & reconnected the wiring from the stepper motors I’ve taken the x-controller apart once to double check connections inside. I’ve double checked that my wiring is tight on both the stepper motors & the controller. Not pressing any buttons now for about a half-hour but the Y-axis is still making a small adjustment on its own (lagging?) every ~20 seconds or so. Intro to CNC for a Total Novice: Setting up a Laser (Based off the works of Graham Bland) LightBurn Quick-Start Guide: This guide walks you through the installation and use of LightBurn, a powerful and affordable GRBL controller meant specifically for lasers. No power light on the X-controller (I’ve seen this seems to be a persistent issue for many)ĭuring the calibration/jogging process I’ve been able to intermittently get a twitch in all directions but not consistently. Genmitsu 3018-Pro 5.5W Laser Module User Guide. Just assembled a new X-carve 1000x1000 w\ X-controller & have an older MacBook Air plugged in. I’m brand new here so forgive me if I ask many questions…I don’t know what I’m doing.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |